AJA Ki PRO rack Spezifikationen PDF herunterladen (Seite 75)

Ki Pro Rack Installation and Operation Manual — Web Browser via Ethernet

Clip Number (17.3): This parameter determines the clip number, from 1 to 999, that

follows the CLIP NAME, and is associated with all clips generated while using this

setting. To enter a specific value, click on the number to highlight it, type in a value,

and press Enter to confirm the new value. You may also click and drag on the slider

to make adjustments. To increment by single values using the slider, click the slider

to highlight it, and then press the "back" arrow or "forward" arrow on your

keyboard.

Clip Append (17.4): This parameter is used with parameter 17.5 ALPHA APPEND to

append a text value after the CLIP NUMBER or have no text appended.

Alpha Append (17.5): This parameter is used with parameter 17.4 CLIP APPEND to

append a text value after the CLIP NUMBER.

Take (17.8): This parameter determines the TAKE number, from 1 to 999, that follows

the CLIP NAME and CLIP NUMBER, followed by any ALPHA APPEND (if selected),

generated for all clips while using this setting.

Use Custom Clip Name (19.1): This parameter enables or disables whether a custom clip

name can be used. Refer to “Custom Clip Naming” in Chapter 3 for greater detail.

Custom Clip Name (19.2): This parameter allows you to enter a custom clip name. To

enter, click on the default name, “Custom” and type a new name. Once entered,

you’ll have to click the Apply button for it to take effect and be used.

Custom Take (19.4): This parameter allows you to define a custom take number. Once

entered, you’ll have to click the Apply button for it to take effect. To enter a specific

value, click on the number to highlight it, type in a value, and press Enter to confirm

the new value. You may also click and drag on the slider to make adjustments. To

increment by single values using the slider, click the slider to highlight it, and then

press the "back" arrow or "forward" arrow on your keyboard.

Gang Clip Name (22.1): This parameter is used when performing gang recording via

multiple Ki Pros (refer to Controlling Multiple Ki Pros earlier in this Chapter). If you

want to name clips the same way across all the recordings of Ki Pro ganged units,

then use the "Master Name" pull down selection. If you want to name clips

independently on Ki Pro units, then select "Slave Name" from the pull down.

Selecting "Slave Name" means that the recording will take it's name from the

individual Ki Pro's parameters and not accept the value pushed to the Slave by the

Master Ki Pro. Refer to “Custom Clip Naming” in Chapter 3 for greater detail.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 112 113

Keine Kommentare

AJA Ki PRO rack Spezifikationen Seite 75