AJA Ki PRO rack Spezifikationen PDF herunterladen (Seite 81)

Ki Pro Rack Installation and Operation Manual — Web Browser via Ethernet

Netmask (50.3): enter a subnet mask compatible with your LAN (if you have one). You

must also click the “Update IP Address” button to update Ki Pro with the changed

information entered here.

Default Gateway (50.4): enter the IP address for your LAN’s gateway/router (if you have

one). You must also click the “Update IP Address” button to update Ki Pro with the

changed information entered here.

Apply: pressing this button requests Ki Pro to update its IP information with that

entered on this screen.

Available Ki Pros- The Network panel on the right side of the screen lists the Ki Pro

devices present on the same local LAN as the current Ki Pro (see note below). The

serial numbers of all Ki Pros on the LAN, or their defined “System Names” (see

parameter 50.5) are listed—and clicking on any of these will bring up the Status

screen of that Ki Pro. Note: the Ki Pro you control may be running a different

software version so screens may look different. As a rule, it’s wise to have all your Ki

Pro devices running the most current software and the same version. Also, without

a properly configured default gateway (whether you have a router/gateway or

not), the discovery feature “Available Ki Pros—Click to Refresh” on the Network

page may not work.

Note: Ki Pro devices shown are cached and may not reflect the realtime state of all Ki

Pros on the LAN. As Ki Pros are added or removed from the network they may take

awhile to appear in the Available Ki Pros listing. If, at any time you want a current

view of the network (clearing the cache and showing the realtime state), click the

up arrow in the top right corner of the Network panel twice to refresh (close and

reopen) the list.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 112 113

Keine Kommentare

AJA Ki PRO rack Spezifikationen Seite 81