AJA R5CE Bedienungsanleitung PDF herunterladen (Seite 6)

Output Selection

Matrix For Output

3 BNCs

The following table shows the combinations of DIP switch settings required to choose

output formats for the three conﬁgurable output BNCs.

Installation

Typically, R5CE installation consists of the following:

disconnect power from the frame (remove line cord)

remove the FR1/FR2 front panel

install R5CE card module

apply external color black reference at the frame’s External Reference BNC

apply power to the frame by connecting a north american-style power cord from the

frame to mains power (90 to 260 VAC)

Instructions for removing the frame front door for module installation is discussed in the

FR1/FR2 User Manual.

S5 — PEDESTAL Set pedestal for

Composite outputs

(only). Note: there is

no effect with 625

input.

ON (UP) = 7.5 IRE pedestal for NTSC .:

OFF (DOWN) = No pedestal for NTSC-J

S6 — TEST Enable or disable

test pattern output

OFF (UP) = Disables internal test signal

ON (DOWN) = Selects internal 75% colors bars

test signal

Switch Number Description Details

Output Format

DIP Switch

3 Composite CMPSTE RGB N/A

1 Composite and 1 Y/C CMPSTE YPbPr/YC N/A

RGB CMPNT RGB N/A

SMPTE component (BETA625) CMPNT YPbPr/YC SMPTE

BETA 525 component CMPNT YPbPr/YC BETA

1 2 3 4 5 6 7 8

Keine Kommentare

AJA R5CE Bedienungsanleitung Seite 6