Aja Ki Pro Bedienungsanleitung Seite 22
- Seite / 110
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Ki Pro v3.2 www.aja.com
22
LANC Loop This connector accepts a LANC plug (2.5mm 3-conductor TRS jack) and then
loops it through to a second connector (loop). LANC or Local Application
Control Bus System (sometimes called Control-L) is a Sony protocol for
synchronizing cameras. Available on many brands of cameras, LANC enables
accessories to control camera and Ki Pro record/stop functions.
Lens Tap This connector supports an optional “Lens Tap” kit AJA offers for controlling Ki Pro. A
proprietary AJA cable connects between the camera body and the lens, intercepting the
camera’s own interconnecting cable. This enables Ki Pro transport control (record/stop)
by simply operating the shutter/record button on the camera. Lens tap is not supported in
versions 1.0–3.1, but may be supported by a future version.
LED Indicator for IEEE
802.11 Radio
This LED shows the status of the internal 802.11 radio used to transmit and receive
data. When illuminated, the LED shows the radio is ON.
Power Connector (back
of unit)
On the back of Ki Pro is a standard 4-pin male XLR connector for
supplying 12-Volt DC power to the unit. You can use either the supplied
AC Adapter or furnish your own battery source. Since the connector is
an industry standard pinout, choices are varied and flexible. Many 3rd
party vendors offer products using this standardized power connector.
Pin 1: -
Pin 4: +
Pins 2 and 3: not used
Storage
Record hours of media to a portable removable hard-drive storage module with built-in
FireWire 800, or to flash-based ExpressCard/34 cards (only Slot 1 is enabled). Both media
types mount on your OSX desktop for immediate editing and file access. Ki Pro ships with
a 250GB hard disk that can store up to 2 hours of 1080i Apple Pro Res 422 HQ media or 3
hours of standard 1080i Apple Pro Res 422 (more for standard definition).
ExpressCard/34
Memory Cards
Although AJA doesn't manufacture or sell ExpressCard/34 memory cards, Ki Pro accepts
qualified ExpressCard media beginning with firmware version 3.0 (only Slot 1 is enabled).
Figure 6. ExpressCard/34 Memory Card
Caution!
Failure to properly mount or dismount media, or an unexpected loss of power while
recording, can result in an unrecoverable data loss.
- Version 3.2 1
- Published: October 9, 2013 1
- Table of Contents 2
- Trademarks 7
- Copyright 7
- Contacting Support 7
- Chapter 1: Introduction 8
- Features 9
- System Requirements 11
- Apple ProRes 422 Advantages 11
- In This Manual 12
- Chapter 2: Ki Pro at a Glance 13
- Operator Side 14
- ADJUSTSELECT 16
- Connector Side 18
- LTC Timecode Input 19
- And Output 19
- CVBS Composite NTSC/ 20
- PAL Output 20
- ExpressCard/34 22
- Memory Cards 22
- Firewire 800 23
- Connector 23
- Power connector 23
- (AC Adapter) 23
- Installation Overview 25
- What’s In The Box? 26
- Stand-Alone Usage 27
- Ki Pro with Exo-skeleton and 28
- Accessory Rod Kit 30
- Setup and 30
- Adjustment 30
- Applying Power 32
- Plug 4-pin XLR into 12Vdc 33
- Ki Pro power socket 33
- Line CordDC supply 33
- Remote Network Control 34
- TCP/IP Information 35
- You’ll Need 35
- Networking via 35
- Networking Ki Pro 36
- Select Adjust 40
- TRANSPORT Mode 40
- STATUS Menu (Record Mode) 40
- STATUS Menu (Play Mode) 40
- CONFIG Menu 41
- MEDIA Menu (like CONFIG) 41
- STATUS menus 43
- Play ModeRecord Mode 44
- MEDIA menus 47
- Clip Naming—Two 50
- Examples 50
- Custom Clip 51
- CONFIG menus 52
- Parameters 53
- 3.2 COMPONENT OUT 57
- 5.2 DOWN 58
- CONVERSION 58
- Anamorphic 59
- Letterbox 59
- Important Notes About 62
- The Various Cameras 62
- Supported by 13.1 62
- 50.7 802.11 MAC 67
- 50.9 USER 68
- AUTHENTICATION 68
- 54.3 802.11 DHCP 71
- Default: 6 72
- Remote Control Overview 73
- General Screen Information 73
- Update Firmware 88
- Preparing to Update 89
- Software 89
- Upload and Install the 89
- Software on your Ki Pro 89
- Using Wireless 91
- Devices to Control 91
- When Using an iPhone 92
- Advanced Features 95
- How to Use Gang 96
- Recording 96
- Gang Recording 97
- Working with the All 98
- Clips Playlist 98
- Appendix A: Specifications 103
- Hardware Conversion 105
- Physical 105
- Limited Warranty 106
- Limitation of Liability 107
Verwandte Produkte und Handbücher für Zubehör für Video Aja Ki Pro
Zubehör für Video Aja FS2 Manual Bedienungsanleitung
(125 Seiten)
(125 Seiten)
(27 Seiten)
Zubehör für Video Aja 4K2HD Bedienungsanleitung
(32 Seiten)
(32 Seiten)
Zubehör für Video Aja ROI Bedienungsanleitung
(36 Seiten)
(36 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 4.984 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern